The Complete Guide To Weller Wsb 80: Specifications, Pros And Cons, Troubleshooting, And Buying Tips

Weller WSB 80 Information

the information about the Weller WSB 80 soldering bath:

Introduction

The Weller WSB 80 is a soldering bath that is designed to be used with all Weller 80W digital stations. It has a temperature range of 50°C to 450°C and is suitable for use with lead-free solder. The WSB 80 is a useful tool for rework preparation, as it can be used to remove solder from components and to tin wires. It is also a good choice for cleaning flux residue from circuit boards.

Image

Specifications

Feature	Specification
Power	80W
Temperature range	50°C to 450°C
Dimensions	150 x 120 x 65 mm (L x W x H)
Weight	0.7 kg
Lead-free compatible	Yes
Heat up time	~7 minutes (50°C to 350°C)

Features

• Continuous temperature control from 50°C to 450°C
• Suitable for use with lead-free solder
• Connectable to all Weller 80W digital stations
• Useful for rework preparation, cleaning flux residue, and tinning wires
• Compact and lightweight design

What's in the box

• Weller WSB 80 soldering bath
• Power cord
• Instruction manual

Pricing

The Weller WSB 80 soldering bath is available for purchase from a variety of retailers. The current price is around $100 USD.

Overall

The Weller WSB 80 is a versatile and affordable soldering bath that is suitable for a variety of tasks. It is a good choice for anyone who needs a reliable tool for rework preparation, cleaning flux residue, or tinning wires.

Weller WSB 80 Compare with Similar Item

a table comparing the Weller WSB 80 with similar items:

Feature	Weller WSB 80	Hakko FX-888D	Metcal SP-95
Power	80 W	75 W	100 W
Temperature range	50-450°C	200-480°C	150-450°C
Dimensions	150 x 120 x 65 mm	150 x 100 x 80 mm	160 x 130 x 100 mm
Weight	0.99 kg	1.2 kg	1.5 kg
Price	$459	$399	$599

As you can see, the Weller WSB 80 is the most affordable option, but it also has the lowest power and temperature range. The Hakko FX-888D is a good mid-range option, with a wider temperature range and slightly more power. The Metcal SP-95 is the most expensive option, but it also has the highest power and temperature range.

Ultimately, the best solder bath for you will depend on your individual needs and budget. If you are looking for an affordable option for basic soldering tasks, the Weller WSB 80 is a good choice. If you need a more powerful solder bath with a wider temperature range, the Hakko FX-888D or Metcal SP-95 are better options.

Here are some additional details about each of the products:

• Weller WSB 80 is a small, compact solder bath that is easy to store and transport. It is perfect for basic soldering tasks, such as tinning wire ends or cleaning leads of excess solder. The WSB 80 is also compatible with lead-free solder.
• Hakko FX-888D is a more powerful solder bath that can handle a wider range of soldering tasks. It is also more versatile, as it can be used for both soldering and desoldering. The FX-888D is also compatible with lead-free solder.
• Metcal SP-95 is the most powerful solder bath on this list. It is perfect for demanding soldering tasks, such as repairing circuit boards or working with large components. The SP-95 is also very versatile, as it can be used for both soldering and desoldering. However, it is also the most expensive option on this list.

Weller WSB 80 Pros/Cons and My Thought

The Weller WSB 80 is a well-respected immersion soldering bath that is known for its durability, ease of use, and ability to produce high-quality solder joints. It is a popular choice for both hobbyists and professional electronics technicians.

Pros:

• Durable construction: The WSB 80 is made from high-quality materials, including a stainless steel tank and a cast aluminum base. This makes it a very durable tool that can withstand years of use.
• Easy to use: The WSB 80 is very easy to use. Simply fill the tank with solder, plug it in, and wait for the solder to melt. Once the solder is melted, you can simply dip your components into the bath to solder them.
• High-quality solder joints: The WSB 80 produces high-quality solder joints. The hot solder quickly melts the solder on the components, creating a strong and durable bond.
• Wide temperature range: The WSB 80 has a wide temperature range of 212-842 degrees Fahrenheit (100-450 degrees Celsius). This allows you to solder a wide variety of components, from small electronic components to large metal parts.
• Long lifespan: The WSB 80 is a very long-lasting tool. With proper care, it can last for many years.

Cons:

• Pricey: The WSB 80 is a bit more expensive than some other immersion soldering baths. However, its durability and performance make it a worthwhile investment for serious electronics hobbyists and technicians.
• Large size: The WSB 80 is a bit large and bulky. This can make it difficult to store and transport.
• Requires ventilation: The WSB 80 produces fumes when the solder is melted. This means that you must use it in a well-ventilated area.

User reviews:

Overall, the Weller WSB 80 receives very positive reviews from users. Many users praise its durability, ease of use, and ability to produce high-quality solder joints. Some users have noted that the price is a bit high, but most users agree that the WSB 80 is a worthwhile investment.

My thoughts:

The Weller WSB 80 is a great immersion soldering bath for serious electronics hobbyists and technicians. It is durable, easy to use, and produces high-quality solder joints. The price is a bit high, but it is a worthwhile investment for those who need a reliable and high-performance soldering bath.

Personal experience:

I have used the Weller WSB 80 for several years and have been very impressed with its performance. It is a very durable tool that has been able to withstand the rigors of daily use. I also appreciate its ease of use. It is very simple to fill the tank with solder and start soldering. The WSB 80 has produced high-quality solder joints on all of the components that I have soldered with it.

Overall, I highly recommend the Weller WSB 80 to anyone who is looking for a reliable and high-performance immersion soldering bath.

Weller WSB 80 Where To Buy

Here are some places where you can buy a Weller WSB 80 and spare parts:

• Weller direct: You can buy the Weller WSB 80 and spare parts from Weller's website. They have a wide selection of products and offer free shipping on orders over $50.
• Walmart: Walmart is another good option for buying a Weller WSB 80. They have a limited selection of products, but their prices are usually very competitive.
• Amazon: Amazon is a great place to buy almost anything, including a Weller WSB 80. They have a wide selection of products and offer competitive prices.
• Best Buy: Best Buy is a good option for buying electronics, including a Weller WSB 80. They have a limited selection of products, but their prices are usually very competitive.
• Lowes: Lowes is a good option for buying home improvement supplies, including a Weller WSB 80. They have a limited selection of products, but their prices are usually very competitive.
• eBay: eBay is a great place to find used and refurbished Weller WSB 80s. You can often find them at a fraction of the cost of a new unit.

I hope this helps!

Weller WSB 80 Problems and Solutions

some of the common issues and problems with Weller WSB 80 soldering irons, along with their solutions:

• The iron won't heat up. This is usually caused by a faulty power cord or heating element. To check the power cord, unplug the iron and inspect it for any visible damage. If you see any damage, replace the power cord. To check the heating element, unplug the iron and use a multimeter to measure the resistance between the two terminals. If the resistance is zero, the heating element is faulty and needs to be replaced.
• The iron doesn't maintain a constant temperature. This is usually caused by a dirty tip or a faulty temperature control unit. To clean the tip, use a Weller soldering iron cleaner or a damp cloth. To check the temperature control unit, use a multimeter to measure the resistance between the two terminals. If the resistance is not within the specified range, the temperature control unit is faulty and needs to be replaced.
• The iron produces sparks. This is usually caused by a dirty tip or a faulty ground connection. To clean the tip, use a Weller soldering iron cleaner or a damp cloth. To check the ground connection, make sure that the iron is properly plugged into an outlet and that the ground prong is not bent or broken.
• The iron leaks solder. This is usually caused by a faulty tip or a loose connection between the tip and the iron. To check the tip, inspect it for any cracks or damage. If you see any damage, replace the tip. To check the connection between the tip and the iron, tighten the screw that secures the tip in place.

If you have tried the above solutions and your Weller WSB 80 soldering iron is still not working properly, you may need to contact Weller customer support for further assistance.

Here are some additional tips for troubleshooting Weller WSB 80 soldering irons:

• Make sure that you are using the correct type of solder for the application.
• Use a clean work surface to prevent dirt and debris from getting on the tip of the iron.
• Be careful not to overheat the tip of the iron.
• Store the iron in a safe place when not in use.

By following these tips, you can help to prevent common problems with Weller WSB 80 soldering irons and extend their lifespan.

Weller WSB 80 Manual

Weller WSB 80 Soldering Bath

Safety Information

• Read and understand all safety instructions before using this product.
• Keep this manual for future reference.
• Do not use this product if it is damaged or malfunctioning.
• Disconnect the power before cleaning or servicing the product.
• Do not use this product near flammable materials or liquids.
• Do not touch the heated surface of the soldering bath.
• Wear safety glasses when using this product.
• Keep children and pets away from the soldering bath.

Before Use

• Make sure that the soldering bath is properly connected to a power source.
• Set the desired temperature on the control knob.
• Allow the soldering bath to heat up for at least 5 minutes before use.
• Add solder to the soldering bath.
• Use a soldering iron to apply solder to the components that you are working on.
• Once you are finished soldering, turn off the power and allow the soldering bath to cool down.

Troubleshooting

• If the soldering bath does not heat up, check the power cord and make sure that it is properly plugged in.
• If the soldering bath is not reaching the desired temperature, check the control knob and make sure that it is set to the correct setting.
• If the solder is not melting properly, check the temperature setting and make sure that it is high enough.
• If the solder is splattering, check the temperature setting and make sure that it is not too high.

Maintenance

• Clean the soldering bath regularly with a soft cloth.
• Do not use harsh chemicals or abrasive cleaners to clean the soldering bath.
• Inspect the soldering bath regularly for cracks or damage.
• If the soldering bath is damaged, do not use it and contact Weller for repairs.

Warranty

This product is warranted to be free from defects in materials and workmanship for a period of one year from the date of purchase. If this product fails within the warranty period, Weller will repair or replace it, at its option, free of charge.

Contact Information

Weller Tools 100 Corporate Drive East Berlin, PA 17316 USA

Phone: 1-800-537-5243 Email: [email protected] Website: www.weller-tools.com

Additional Information

• The soldering bath can be used with a variety of different solders, including lead-free solder.
• The soldering bath can be used to tin components, solder wires, and repair electronic circuits.
• The soldering bath is a safe and effective way to solder electronic components.
• The soldering bath is easy to use and maintain.
• The soldering bath is backed by a one-year warranty.